Dynex DX-19L200A12 - Manual (Page 40)

36
Changing the TV setup DX-19L200A12
3 Press or to select On Timer, then press or to
change the setting. You can select Off,
0h30m,1h00m, 1h30m, 2h00m, or 3h00m
···12h00m.
4 Press EXIT to return to the normal screen.
Setting the Auto Shut Off
When the Auto Shut Off feature is set to On, the TV
automatically shuts itself off when a station being viewed
stops broadcasting and the TV is not operated for 15
minutes.
To set the Auto Shut Off:
1 Press MENU. The Main Menu screen appears.
2 Press or to select Setup, then press or ENTER.
The Setup menu opens.
3 Press or to select Auto Shut Off, then press or
to change the setting. You can select:
• On—To turn the Auto Shut Off on.
• Off—To turn the Auto Shut Off off.
4 Press EXIT to return to the normal screen.
Setting the PC Standby
In PC mode, if no signal is received or no operation
performed for one minute, the TV turns to standby mode
automatically (LED light flashes red). When an input signal
is received or an operation performed on the PC, the TV
returns to On mode.
To set the Auto Shut Off:
1 Press MENU. The Main Menu screen appears.
2 Press or to select Setup, then press or ENTER.
The Setup menu opens.
3 Press or to select PC Standby, then press or
to change the setting. You can select:
• On—To turn PC Standby on.
• Off—To turn PC Standby off.
4 Press EXIT to return to the normal screen.
Main Menu
Picture
>>
ENTER :Set :Select
Audio
Channel
Lock
Setup
CH
Setup
Closed Caption
Language
Video Label
On Timer
Auto Shut Off
Auto Setup
>>
English
>>
Off
On
>>
ENTER :Set :Select
Main Menu
Picture
>>
ENTER :Set :Select
Audio
Channel
Lock
Setup
CH
Setup
Language
Video Label
On Timer
Auto Shut Off
Auto Setup
PC Standby
English
>>
Off
On
>>
>>
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 36 Thursday, November 3, 2011 10:06 AM