Dynex DX-19L200A12 - Manual (Page 10)

6
Making connections DX-19L200A12
Remote control
Making connections
What connection should I use?
Your TV has several connection types for connecting
devices to your TV.
For the best video quality, you should connect a device to
the best available connection.
Use the following tables to identify cables:
DIGITAL AUDIO
COAXIAL OUT jack
Connect a digital audio amplifier cable
to this jack. For more information, see
“To connect a basic home theater
system using digital audio:” on
page 14.
ANT. (RF) IN jack
Connect an antenna or cable TV to this
jack. For more information, see
“Connecting an antenna or cable TV
(no box)” on page 10.
# Button Description
POWER
Press to turn your TV on or off (Standby
mode). When your TV is off, power still flows
into it. To disconnect power, unplug the
power cord.
.
Press to enter a digital sub-channel number.
For more information, see “Selecting a
channel” on page 16.
SLEEP
Press to set the sleep timer. For more
information, see “Using the Sleep setting” on
page 16.
VOL+/VOL–/
Press to increase or decrease the volume.
Press the arrow keys to navigate through the
on-screen menus and adjust settings.
MENU Press to open the on-screen menu.
RESET
Press to reset the picture and audio settings
to factory default.
INPUT
Press to open the INPUT SELECT list, then
press
or to select a video input source.
For more information, see “Selecting the
video input source” on page 16.
ZOOM
Press to select the aspect ratio. For more
information, see “Setting the TV picture size”
on page 19.
# Item Description
9
10
1
2
3
4
5
6
7
8
MTS/SAP Press to select the soundtrack language.
Numbers
Press to enter channel numbers and the
parental control password.
RECALL Press to go to the last viewed channel.
MUTE
Press to mute the sound. Press again to
restore the sound.
CH+/CH–/
Press to go to the next or previous channel
in the channel list. For more information, see
“Selecting a channel” on page 16. Press the
arrow keys to navigate through the
on-screen menus and adjust settings.
ENTER Press to confirm selections or changes.
EXIT Press to close the on-screen menu.
INFO
Press to display TV status information, such
as the channel number, channel name (if
available), or signal source. For more
information, see “Viewing program
information” on page 16.
CCD
Press to display the Closed Caption menu
screen.
Connection
type and jack Video
quality
Cable connector
HDMI
video/audio
Best (use this
if your
devices have
HDMI)
Component
video (requires
an audio
connection)
Better than
composite,
or coaxial
Composite
video (requires
an audio
connection)
Better than
coaxial
Coaxial (RF)
video/audio
Good
# Button Description
9
10
11
12
13
14
15
16
17
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 6 Thursday, November 3, 2011 10:06 AM