Dynex DX-19L200A12 - Manual (Page 30)

26
Changing channel settings DX-19L200A12
4 Press or to select Add/Delete, then press or
ENTER. The Add/Delete screen opens.
5 Press or to select Adding Channel, then press
or ENTER. The new channel is added to the channel
memory.
6 Press EXIT to return to the normal screen.
Deleting channels from memory
To delete a channel from memory:
1 Press MENU. The Main Menu screen appears.
2 Press or to select Channel, then press or
ENTER. The Channel menu opens.
3 Press or to select Add/Delete, then press or
ENTER. The Add/Delete screen opens.
4 Press or to select Add/Delete, then press or
ENTER. The Add/Delete submenu opens.
5 Press or to select the channel you want to
delete, then press or to select Delete.
6 Repeat Step 5 to delete additional channels.
7 Press EXIT to return to the normal screen.
Clearing all channels from memory
To clear all channels from memory:
1 Press MENU. The Main Menu screen appears.
Add/Delete
Adding Channel >>
Clear All >>
Add/Delete >>
ENTER :Set :Select
CH
Lock
Setup
Main Menu
Picture
>>
ENTER :Set :Select
Audio
Channel
CH
Channel
Add/Delete
DTV Signal
Auto Ch Memory
Ch Label
>>
>>
>>
>>
:Select ENTER :Set
CH
Add/Delete
Adding Channel >>
Clear All >>
Add/Delete >>
ENTER :Set :Select
CH
CH Signal
2 Analog
3
3-1
3-2
Analog Add
Digital Delete
Digital Add
4 Analog Delete
Add/Delete
Add
:Adjust :Select
CH
Lock
Setup
Main Menu
Picture
>>
ENTER :Set :Select
Audio
Channel
CH
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 26 Thursday, November 3, 2011 10:06 AM