Dynex DX-19L200A12 - Manual (Page 36)

32
Setting parental controls DX-19L200A12
If the TV is not currently storing the additional rating
system, the TV begins downloading it, which may
take some time to be completed.
6 Set your preferred content rating limits for the
additional rating system. You also need to perform
the update procedure to update rating information.
Notes:
• You can only download the additional V-Chip rating system when
your TV is receiving a digital signal.
• When you download the additional rating system, it may take some
time for the download to occur.
• The V-Chip rating information and system are not determined or
controlled by the TV.
• The standard V-Chip rating system is available whether your TV is
receiving a digital signal or not, and will block both analog and
digital programs. To set the restriction level using the standard
V-Chip rating system, select V-Chip Set in step 4.
• The downloadable V-Chip rating system is an evolving technology,
and availability, content, and format may vary.
• You cannot select this feature if the TV is not receiving a digital signal
for the current station.
Clearing V-Chip settings
To clear the all V-Chip settings:
1 Press MENU. The Main Menu screen appears.
2 Press or to select Lock, then press or ENTER.
The Password Enter screen opens.
3 Enter your password (4 digits) using Number
buttons (0-9), then press ENTER. The Lock menu
opens.
4 Press or to select V-Chip, then press or ENTER
to select On.
5 Press or to select V-Chip Clear, then press or
ENTER . The V-Chip Clear screen opens.
6 Enter your password (4 digits) using Number
buttons (0-9), then press ENTER. All of your settings
return to factory default.
Main Menu
Picture
>>
ENTER :Set :Select
Audio
Channel
Lock
Setup
CH
Password _ _ _ _
Lock
ENTER :Set [0-9] :Enter Code
:Adjust :Select
Lock
V-Chip
V-Chip Set
V-Chip Set (DTV)
Update
V-Chip Clear
Change Password
Off
>>
>>
>>
>>
>>
Password _ _ _ _
V-Chip Clear
ENTER :Set [0-9] :Enter Code
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 32 Thursday, November 3, 2011 10:06 AM