Dynex DX-19L200A12 - Manual (Page 31)

Changing channel settings
27
DX-19L200A12
2 Press or to select Channel, then press or
ENTER. The Channel menu opens.
3 Press or to select Add/Delete, then press or
ENTER. The Add/Delete screen opens.
4 Press or to select Clear All, then press or
ENTER.
5 Press EXIT to return to the normal screen.
Checking the digital signal strength
To check the digital signal strength:
1 Press MENU. The Main Menu screen appears.
2 Press or to select Channel, then press or
ENTER. The Channel menu opens.
3 Press or to select DTV Signal, then press or
ENTER. The DTV Signal screen opens.
Adjust the direction of the antenna to obtain the
maximum signal strength.
Notes:
• Signal meter is not available for analog channels.
• After 240 seconds, DTV Signal screen returns to normal TV operation
automatically.
Channel
Add/Delete
DTV Signal
Auto Ch Memory
Ch Label
>>
>>
>>
>>
:Select ENTER :Set
CH
Add/Delete
Adding Channel >>
Clear All >>
Add/Delete >>
ENTER :Set :Select
CH
Lock
Setup
Main Menu
Picture
>>
ENTER :Set :Select
Audio
Channel
CH
Channel
Add/Delete
DTV Signal
Auto Ch Memory
Ch Label
>>
>>
>>
>>
:Select ENTER :Set
CH
Signal Level
0 50 100
DTV Signal CH
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 27 Thursday, November 3, 2011 10:06 AM