DNF Controls ST300-DSR1K User Manual
Page 17
ST300-DSR1K & ST300-DSR1K-T, Slow Motion Controller
Page
1
1
7
7
o
o
f
f
2
2
4
4
ST300 SETUP
Press Softkey beneath {ClearCues} to clear all Cue Points to 00:00:00:00.
Press Softkey {YES} when asked “Are You Sure?”
Press Softkey beneath {SetDefault} to set ST300 to default settings.
Press Softkey {YES} when asked “Are You Sure?”
Press softkey {NO} to leave Setup without changes.
DISPLAY
SOFTWARE
VERSION
The version number for the currently installed software is displayed.
DROP
FRAME
Press Softkey to select DROP FRAME {ON} or {OFF}.
Used to preset the VTR’s Timecode Generator.
RECORD KEY
Press Softkey to select single button or 2-button record.
RECORD = {[REC]} Only
OR
RECORD = {[REC] + [PLAY]}
FREEZE
Press Softkey to enable or disable FREEZE at Record Outpoint. Changing mode
automatically clears FREEZE point.
INPUT VIDEO
DELAY
Input Video Delay specifies the time interval between video recorded on the Recorder part
of the DSR being available for playback.
This parameter is used in GO TO LIVE function.
The default value is 5 seconds.
TRANSMIT
CUELIST
Transmits Cuelist to another ST300 or to a PC.
RECEIVE
CUELIST
Receives Cuelist from another ST300 or from a PC.
ST300 SETUP
Clear Cues
SetDefault