DNF Controls ST300-DSR1K - Manual (Page 11)

ST300-DSR1K & ST300-DSR1K-T, Slow Motion Controller Page 1 1 1 1 o o f f 2 2 4 4
5. DSR-DR1000 FUNCTIONS
(Only available when DSR mode is set to ON)
a. SELECT DSR1K MODE
1)
Press [MENU] key.
2) Turn the wheel until the display shows “DSR1K.”
3) Press {ON} softkey to turn DSR1K mode ON. In this mode, Recorder and
Player channels of a DDR are treated as one VTR.
[VTR3] and [VTR4] keys are disabled in this mode.
Refer to Installation, Section 3, for connection information.
When DSR1K mode is OFF the controller behaves as a standard ST300 VTR
controller.
4) Press [ESC] key to exit menu.
b. START RECORD
1) Press [SHIFT] + [REC] on VTR1 to start recording on Record channel
connected to VTR3 connector of the ST300.
2)
The Record LED turns ON.
3) Press
[SHIFT] + [REC] on VTR2 to start recording on Record channel VTR4
connector of the ST300.
4)
The Record LED turns ON.
c. STOP RECORD
1) Press [SHIFT] + [STOP] on VTR1 to stop recording on Record channel
connected to VTR3 connector of the ST300.
2)
The Record LED turns OFF.
3)
Press [SHIFT] + [STOP] on VTR2 to stop recording on Record channel
connected to VTR4 connector of the ST300.
4) The Record LED turns OFF.
d. GO TO EE
Press [EE] key to go to Live video on the corresponding Playback Channel. The EE
LED turns on.