DNF Controls ST300-DSR1K - Manual (Page 16)

ST300-DSR1K & ST300-DSR1K-T, Slow Motion Controller Page 1 1 6 6 o o f f 2 2 4 4
SLOMO
ST300 display shows
(T-Bar version):
ST300 display shows
(Non T-Bar version):
Press Softkey [TBAR] (or [WHEEL]) to toggle between T-BAR and WHEEL.
The T-BAR has two speed ranges:
0 Æ +200 with a detent at +100 % play speed
OR
0 Æ +100 with a detent at +100%
For Wheel only:
Press Softkey {SPDRANGE} to select SLOMO speed ranges:
Press Softkey to select: 0 Æ +200 OR -100 Æ +200.
Press Softkey {BACK} to return to SLOMO MENU.
Press [ESC] to exit SETUP MENU
OR turn the Wheel to select another item.
For Wheel only:
Press Softkey {PRSET} to select the SLOMO Preset Speed Mode.
Press Softkey {UPDATE}.
When exiting SLOMO mode, the last used speed is saved in the Preset Speed register.
Press Softkey {STATIC}.
The Preset Speed register is NOT updated when exiting SLOMO mode.
It is only changed by [SHIFT] + [SLOMO] (PRESET SLOMO).
TBAR
AUTOENABLE
Press Softkey [ON] to enable slomo to be engaged by moving the TBAR.
WHEEL
AUTOENABLE
Press Softkey {JOG} OR {SHUTTLE} to enable that function to be engaged by turning
the Wheel, or press softkey {OFF} to disable function.
VIDEO
STANDARD
Press Softkey to select {NTSC}, {PAL}, or {24P} video standard, depending on the
standard you’re using.
GANG MODE Press Softkey to select {PERMANENT} GANG (described in the FUNCTION Table) or
{TEMPORARY} GANG.
In TEMPORARY mode, press and hold the VTR key that you want to read status from,
then press the VTR#s of those VTRs that you want to include in the gang. Release the
keys. The LED on the monitored VTR blinks, all other VTRs in the gang stay on
constantly. To break the temporary gang, press any VTR# key.
SLOMO with: WHEEL
SpdRange Preset
SLOMO with: TBAR
Wheel SpdRange Preset