DNF Controls ST300-DSR1K - Manual (Page 10)

ST300-DSR1K & ST300-DSR1K-T, Slow Motion Controller Page 1 1 0 0 o o f f 2 2 4 4
e. RECORD MODE SELECTION
1) Press [MENU]. The MENU indicator will turn on.
2)
Turn the Wheel until “REC” is viewed on the top line of the display. The
current Record mode is shown.
3) Press
[MENU] to select:
Record Lockout, Assemble, Crash or Insert Record mode.
4) INSERT
ONLY - Press the desired Softkey to toggle Video, Audio1, Audio2,
Audio3 or Audio4 record on/off.
The Softkeys are located just below the display.
Follow the line graphic from the bottom of the display to the Softkey.
5) Press [ESC] to exit the MENU. The MENU indicator will turn off.
OR
Turn the Wheel for other setup options.