Digi-Star EZII Escape Computer Command Set - Manual (Page 23)

EZII Escape Computer Command Set
23 D36 48 Rev G November 30, 2009
Rd - Upload Feedline Command:
This command allows a feedline to be uploaded into the EZ 3500 memory using the Computer Interface.
This command includes the following information:
Start new command:
Command identifier: Rd
Data Field Format Text: Sent exactly as shown below.
End of command:
Upload Feedline Command Response:
If the command is completed successfully, then the (Hex value 0x06) character will be returned. If the command fails, the (Hex
value 0x15) character will be returned.
Below is an example feedline (the "quotes" are not part of the string). The leading and trailing "Control Codes" are shown as '*'. See "Feedline
with Control codes & Check Sum:" for more details.
"*Rd*000001,U,I,T,1001,CORN ,HICOW , 2500, , 7350 , , , , 250, , , , , 0, 0**CK*"
The complete Upload Feedline command is shown again with the control codes added to help indicate the data field column and length details.
0 10 20 30 40 50 60 70 80 90 100 110
1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678
*Rd^000001,U,I,T,1001,CORN ,HICOW , 2500, , 7350 , ,0, , 250, ,1, 5, , 0, 0*@C*
| | ||||
| | |||
| |||CkSum
||
|
Each Feedline Data Field is explained below.