Diamondback Fitness 910Ub - Manual (Page 37)

910Ub Owner’s Manual
37
User Name Data Entry
“User 1 Name” or “User 2 Name” will post in the lower display and “User 1” or “User 2” will post in the Matrix Display field (depending upon
which user profile was selected). Pressing the ENTER key will allow the user to personalize the data for the displayed profile. If the user name
has been previously adjusted, the entered name will then scroll once and post with the first character blinking. Adjust the first character via
the UP and DOWN arrow keys. Press the RIGHT arrow key to confirm the character selection and move to cursor the next character. The
choice of available characters is A ‐ Z, a ‐ z, 0 ‐ 9 and the “_” (space). The user may store up to ten (10) characters for each user name. If the
desired name is less than ten (10) characters, press ENTER to save settings and launch Workout Time data entry.
User Workout Time Data Entry
“Workout time” will post in the lower display and the default value of “30:00” (or the previously‐adjusted value) will flash in the Total Time
display. Use the UP and DOWN arrows to adjust the workout time for this user profile. The range for workout time is 01:00 to 1:59:00. Press
ENTER to confirm the workout time and enter Age data entry.
User Age Data Entry
“User 1 Age” or “User 2 Age” will post in the lower display (depending upon which user profile was selected). The default or previously‐
adjusted user age value will flash in the Matrix Display. Use the UP and DOWN arrows to adjust the age for this user profile. The available user
age value must be between ten (10) and ninety‐nine (99) years, inclusive. Press the ENTER key to confirm the age setting and enter User
Weight entry.
User Weight Data Entry
“User 1 weight” or “User 2 weight” will post in the lower display (depending upon which user profile was selected). The default or previously‐
adjusted user weight value will flash in the Display Matrix. Use the UP and DOWN arrows to adjust the weight for this user profile. The
available user weight value must be between 23 and 350 pounds (or 10 and 150 Kilograms if the console is set to metric units), inclusive. Press
the ENTER key to confirm the weight setting and enter User Gender entry.
User Gender Data Entry
“User 1 gender” or “User 2 gender” will post in the lower display (depending upon which user profile was selected). The default or previously‐
adjusted user gender value will flash in the Display Matrix. Use the UP and DOWN arrow keys to view the user gender options (“Male”,
“Female”). To select the displayed gender setting, press the ENTER key. Press the ENTER key to return to the User Setup profile selection
mode, or press STOP to save all adjusted settings and return to Idle mode or previous program.