Diamondback Fitness 910Ub - Manual (Page 25)

910Ub Owner’s Manual
25
English Unit Mode and Metric Unit Mode
The default unit setting for the console is the English measurement system. To toggle between the English and Metric unit modes, press and
hold the UP and DOWN keys, simultaneously for two (2) seconds while in the Banner or Demo modes. “Set units” will post in the lower display
screen while the Matrix Display will flash either “English” or “Metric” to indicate the current unit setting. Press the UP or DOWN keys until the
desired unit mode is displayed. Press ENTER to accept the selection.
Operating Notes
Power On and Off When the AC adapter is plugged into the unit, all LCD segments on the console will light to confirm power has
reached the unit.
Power Save Mode In the power save mode, press any key or move the step arms to wake up the console and begin operation.
Reset To reset the console and clear all user data, press and hold the STOP key for two (2) seconds. When the program
resets, the console returns to the Idle mode.
Pause and Resume The user may interrupt or pause a program for up to five (5) minutes during a workout. To pause the program,
simply press the STOP button. To resume the program, press the GO key before the five (5) minute Pause mode
times out.
Resistance Levels During the workout program, the user may press the UP or DOWN keys to adjust the resistance level. Manual
resistance adjustments are not available in the heart rate interactive programs.
Calculated Maximum An estimated maximum heart rate which may be used to determine a threshold for safe exertion
Heart Rate
levels. The calculation is 220 – AGE = Calculated Maximum Heart Rate.
PROGRAMMING FEATURES
Elapsed Time and Remaining Time Switching
While running a program, the Total Time and Segment Time values will switch between elapsed and remaining. The user may stop the
switching and display the current view by pressing the Right Arrow key. Pressing the key again will return the display to switching mode.
Workout Summary
For additional user feedback, the 910 console provides a brief Workout Summary immediately following the completion of the workout
session. “END” will post in the Matrix Display and total Time, Distance and Calorie values for the workout will be displayed for thirty (30)
seconds. The console will then return to the Idle screen.