Diamondback Fitness 910Ub - Manual (Page 26)

26
CONSOLE SETUP
Console Default Settings
This unit is shipped with the default values appropriate for the U.S. market.
Setting Default/Factory Setting Available Settings
Units English English, Metric
Model Will match the current unit model 910Er, 910Sr, 910Ub
Sound On On, Off
Backlight High High, Low
Demo Mode On On, Off
Console Setup Launch
If the user would like to update the default values, pressing the UP and DOWN arrows keys simultaneously for two (2) seconds will launch the
Console Setup mode.
Units Setup When the Console Setup mode is launched, “Set Units” will post in the lower display field. “English” or “Metric” will
flash in the Matrix Display, depending upon current setting. Use the UP or DOWN arrow keys to scroll through the
available settings and press the ENTER key to select the displayed option. Press ENTER to launch the Model Number
Selections mode. Changing the units will erase all user data.
Model Number “Set Model Number” will post in the lower display field. “910Sr”, “910Ub” or “910Er” will flash in the Matrix Display,
depending upon current setting. Confirm the model number of your unit. Use the UP and DOWN arrow keys to view
the available settings. When the correct model is displayed, press ENTER to select and launch the Sound Settings
mode.
Sound Settings “Sound Setting” will post in the Lower Display. “Sound” will also post in the Matrix Display, followed by a flashing
“On” or “Off” to indicate the current setting. Scroll between the two settings via the UP and DOWN arrow keys,
pressing the ENTER key to confirm the selection and launch the Backlight Settings mode.
Backlight Settings “Backlight Setting” will post in the Lower Display. “Backlight” will scroll once in the Matrix display, followed by a
flashing “High” or “Low” to indicate the current setting. Scroll between the two settings via the UP and DOWN arrow
keys. Confirm the setting by pressing the ENTER key. Demo Mode Settings will launch