Diamondback Fitness 910Ub - Manual (Page 35)

910Ub Owner’s Manual
35
Random The five (5) Random programs are designed to offer the greatest amount of variety within the workout. The profiles
will incorporate varied levels of resistance to simulate a hiking trail’s non‐patterned terrain.
Lap
The 5K Lap and 10K Lap programs simulate a traditional running track course. Depending upon the profile selected,
the user will travel 5 or 10 Kilometer in one loop. The eighty‐four (84) segments will represent 1/84
th of the total
distance. The user’s progress in the program will be displayed as a flashing cursor on the lap course. The lap will begin
and end at the arrow at the lower right corner of the profile.
Classic Program Selection
From the Idle mode, press the QuickSet Program key to open the desired category. The first available course profile will post in the Display
Matrix. Use the UP and DOWN arrow keys to view all course profiles. Press the ENTER key to select the displayed profile and launch the Classic
Programs Setup Mode.
Classic Programs Setup Mode
Once a Classic Program has been selected, on‐screen messaging will guide the user throughout the Setup Mode.
NOTE: The user may press the GO key at any time during the Setup mode to bypass the setup and begin the workout
immediately the with previously‐saved default values. Note that the heart rate feedback will only be accurate if
values for the selected profile are correct for the current use.
User Selection
“Select user” will post in the Lower Display. “User 1” or the previously‐entered User 1 name value will scroll in the Matrix Display. Use the UP
and DOWN arrow keys to view the user selection options (“User 1”, “User 2” or “Guest”). When the desired user profile is displayed, press the
ENTER key to select. Guest user will run with default data and will not operate all heart rate functions.
If the User Setup steps for the selected profile have not been completed, the console will launch the User Setup mode (see the section titled
User Setup Mode for more information), otherwise, the program will launch immediately.
Classic Programs Launch Mode
Once the Classic programs have launched:
 The Matrix Display will post the workout profile and the current progress in the program will be indicated by a flashing stack of
segments. The height of the stacks represents the level of resistance; the higher the stack, the greater the resistance. The resistance
may be adjusted manually via the UP and DOWN arrow keys.