DFI G7B630-B - Manual (Page 99)

9 9
3
BIOS Setup
Exit Without Saving
When you do not want to save the changes you have made, high-
light “Exit Without Saving” and press .
Type “Y” and press . The system will reboot and you will
once again see the initial diagnostics on the screen. If you wish to
make any changes to the setup, press simulta-
neously or aft
er memory testing is done.
Intel RAID BIOS
The Intel ICH8DO chip allows configuring RAID on Serial ATA
drives. It supports RAID 0, RAID 1, RAID 5 and RAID 10.
When the system powers-up and all drives have been detected, the
Intel BIOS status message screen will appear. Press the and
keys simultaneously to enter the utility. The utility allows you to
build a RAID system on Serial ATA drives.
Important:
Before creating RAID, make sure you have installed the Serial
ATA drives and connected the data cables otherwise you won’t
be able to enter the RAID BIOS utility.
Refer to chapter 5 for steps in configuring RAID.
Phoenix - AwardBIOS CMOS Setup Utility
Esc : Quit
F10 : Save & Exit Setup ↑ ↓ → ← : Select Item
Abandon All Data
X Standard CMOS Features
X Advanced BIOS Features
X Advanced Chipset Features
X Integrated Peripherals
X Power Management Setup
X PnP/PCI Configurations
X PC Health Status
X Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Quit Without Saving (Y/N)? N