DFI G7B630-B - Manual (Page 67)

6 7
3
BIOS Setup
CPU Feature
This field is used to configure the CPU that is installed on the sys-
tem board. Move the cursor to this field then press .
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
Item Help
Menu Level XX
↑↓ : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Delay Prior to Thermal
Thermal Management
Limit CPUID MaxVal
C1E Function
Execute Disable Bit
Virtualization Technology 16 Min
Thermal Monitor 1
Disabled
Auto
Enabled
Enabled
Delay Prior To Thermal
This field is used to select the time that would force the CPU to a
50% duty cycle when it exceeds its maximum operating temperature
therefore protecting the CPU and the system board from overheat-
ing to ensure a safe computing environment..
Thermal Management
Select a “thermal monitor” in this field to enable the CPU’s
speedstep function. Restart the system then go to the operating
system’s “Control Panel”. Double-click “Power Options”. The “Power
Options Properties” dialog box will appear. In the “Power Schemes”
menu, select “Portable/Laptop”. Speedstep reduces the CPU’s fre-
quency and voltage in accordance to its load.
Thermal Monitor 1 On die throtting.
Thermal Monitor 2 Ratio and VID transition.