DFI G7B630-B User Manual

Page 22

Hardware Installation

CPU

Overview

The system board is equipped with a surface mount LGA 775
socket. This socket is exclusively designed for installing a LGA 775
packaged Intel CPU.

Important:
1. Before you proceed, make sure (1) the LGA775

1. Before you proceed, make sure (1) the LGA775

socket comes with a protective cap, (2) the cap

socket comes with a protective cap, (2) the cap
is not damaged and (3) the socket’s contact pins

is not damaged and (3) the socket’s contact pins

is not damaged and (3) the socket’s contact pins
are not bent. If the cap is missing or the cap

are not bent. If the cap is missing or the cap

are not bent. If the cap is missing or the cap
and/or contact pins are damaged, contact your

and/or contact pins are damaged, contact your

and/or contact pins are damaged, contact your
dealer immediately

dealer immediately

dealer immediately.....

2. Make sure to keep the protective cap. RMA re-

Make sure to keep the protective cap. RMA re-

Make sure to keep the protective cap. RMA re-
quests will be accepted and processed only if the

quests will be accepted and processed only if the

quests will be accepted and processed only if the
LGA775 socket comes with the protective cap.

LGA775 socket comes with the protective cap.

Installing the CPU

1. Make sure the PC and all other peripheral devices connected to

it has been powered down.

2. Disconnect all power cords and cables.

3. Locate the LGA 775 CPU socket on the system board.

This manual is related to the following products: