Hardware installation cooling fan connectors – DFI G7B630-B User Manual
Page 53
53
2
Hardware Installation
Cooling Fan Connectors
Connect the CPU fan’s cable connector to the CPU fan connector
(J12) on the system board. The system fan connector (J8) and 2nd
fan connector (J18) are used to connect additional cooling fans. The
cooling fans will provide adequate airflow throughout the chassis to
prevent overheating the CPU and system board components.
BIOS Setting
The “PC Health Status” submenu of the BIOS will display the current
speed of the cooling fans. Refer to chapter 3 for more information.
X
X
System fan
X
CPU fan
4
1
Sense
Power
Ground
Speed
Control
4
1
Sense
Power
Ground
Speed
Control
2nd fan
4
1
Sense
Power
Ground
Speed
Control
This manual is related to the following products: