D-Link DES-5024 User Manual

Page 86

Text mode
Original mode

Fast Ethernet Switching System Users’ Guide

Troubleshooting

5024 is not powering on while the power cord is plugged into the
wall socket, the power supply is not working. Return the unit.

All LEDs are Off

Check the power plug and verify that the DES-5024 is receiving
adequate power. Log in to the DES-5024 using Local Console
Management, see Chapter 5, Managing the DES-5024, for
instructions.

Power the DES-5024 off and then power it on again. Use the monitor to

check the error messages. Return the DES-5024 to D-Link for
service if the problem persists.

Forget Password

If you forget your password, contact D-Link Technical Support at
(949) 788-0805 for assistance or check our web site at