D-Link DES-5024 - Manual (Page 73)

Fast Ethernet Switching System User’s Guide
Managing the DES-5024 65
2. Select the Access Right field and toggle the space bar to select Read Only or Read/
Write.
3. Select the Status field and toggle the space bar to select Valid or Invalid.
4. Select Save and press Enter.
Follow these steps to configure the SNMP Trap Manager Setting:
1. Enter the IP Address of the Trap Manager.
2. Enter the name of the SNMP Community String.
3. Select Status and toggle the space bar to select Valid or Invalid.
4. Select Save and press Enter.