Delta Dore 610 TYBOX Installation - Manual (Page 8)

- 15 -
If your thermostat controls a circulator, set the value of the CF05 menu to equal 1.
Circulator anti-seizing
Control time base
Select the time base recommended for your type of installation
Enter your desired setting using the + or - buttons
Press OK to confirm
Enter your desired setting using the + or - buttons
Press OK to confirm and move on to menu CF06
- 14 -
With thermostatic valve electric heating or hot water heaters, the Comfort temperature can
be provided by adjusting the thermostat of each radiator. In this case, only the Economy
and Frost Protection temperatures are set by the TYBOX.
Air conditioning function
If you have a reversible heating / cooling system, change the setting on the CF04 menu to
equal 1. You are now authorised to switch the Tybox between heating and cooling modes.
(see the section on "Changing the heating / cooling mode")
Enter your desired setting using the + or - buttons
Press OK to confirm and move on to menu CF05
Switching the value on menu CF04 to 0 is only possible when the TYBOX is in heating
mode
CF04 0
Air-conditioning function not authorised. (by default)
1
Air-conditioning function authorised.
CF05 0
Anti-seizing off (by default)
1 Anti-seizing enabled (circulator operates for 1 minute
every 24 hours)
CF06 0 15 min (recommended for controlling convectors or traditional
radiators). (by default)
1 30 min (recommended for controlling heat pumps, depending
on the model)
2 45 min (recommended for controlling heat pumps, depending
on the model)