Delta Dore 610 TYBOX Installation User Manual
Page 3
- 5 -
- 4 -
Fitting the thermostat
We recommend that you install your device:
- where there is easy access, such as a corridor, living room or entrance hall,
- on an interior wall at a height of 1.50m from the floor
Your appliance will also show you
the room temperature.
It is therefore recommended that
it be installed well removed from
any sources of heat (e.g. convec-
tors, chimney) and draughts (e.g.
doors, windows).
1
2
• Remove the protective tab from the batteries.
• Open the thermostat housing by pressing on clip
➊
• Unscrew the locking screw on the protective cover of the
connecting terminal box.
• Mount the base using suitable screws and screw anchors or
fit into a flush-mounted box.
3
3
approx.
1.50 m
Partitions (mark
➌
) that can
be removed with pliers
enable connecting wires to
be used, if required.