Datatek UTM User Manual
Page 47
U T M U s e r ' s M a n u a l
01/18/08
47
Configuration #2
This configuration replaces the direct facility between components with an IP infrastructure.
UTM
SAM8
or
SAM16
IP-DSU
IP
Network
The commands used to configure the Universal Trunk Module are as follows:
trunk type=ipdsu modtype=samsl dest=
local ipaddr=
gateway ipaddr=
restore
Please note that it is assumed that the MAC address has been pre-configured in the unit.
A DT-4000 may be used to replace both the SAM16 and the IP-DSU in the depiction above.