Datatek UTM User Manual

Page 37

U T M U s e r ' s M a n u a l

01/18/08

5.2.20 RSTPASS

Syntax: rstpass [key=]

The rstpass command is always available regardless of whether the console is logged in or not.
When invoked without any arguments, it will display unique identification about this particular
device. The user may then contact the manufacturer with that information to obtain the Key>. The is an eight character alphanumeric which is unique to this module.
When the rstpass command is entered with the key= option, the user password
is reset to the original value of “initial”. If an invalid key is entered, a MINOR alarm is generated to
that effect.

5.2.21 TIMEOUT

Syntax: timeout [OFF | ]

For those users that wish the console to automatically log off after a period of inactivity, there is
the console timer. The console timer defaults to the disabled condition and may be activated by
the timeout command.

The command is only visible when the console is logged in. The must be
between 1 and 255 inclusive. When the module determines a period of inactivity of the specified
time, it shall automatically log off the console. An INFO level alarm is issued at that time.

5.2.22 LABEL

Syntax: label [ “Double Quoted String” | none ]

The

label

command is used to give the command console a unique prompt. The command is

visible only when logged into the UTM administrative console. If the

label

command is invoked

without arguments, the current configuration of the label is displayed. If the argument to the

label

command is the word ‘none’, any current label is set to a null value. If the argument to the

label

command is a double quoted string, the contents of the string becomes the application console
prompt label. A console label may be up to 31 characters in length.

5.2.23 HPIO