Datatek AIX V5.3 (32/64 bit kernel) - Manual (Page 26)

I P - C o m m K i t I n s t a l l a t i o n a n d A d m i n i s t r a t i o n G u i d e
f o r A I X – R e l e a s e 1 . 0 . 2 2
11/28/05 Datatek Applications Inc. 26
M dstat module mod_address
****************************** MODULE 19 ******************************
MODULE TYPE SERVICE STATE HARDWARE ERROR COUNT SERIAL NUMBER
cpmhs in service 1 136
LAST HARDWARE ALARM
none
ONLINE ENABLED CABLE AVAIL
yes yes connected yes
Specifically, check that the SERVICE STATE is in service. If it’s not, enter the following
command on the node console:
CC0> rs cpm mod_address