Datatek AIX V5.3 (32/64 bit kernel) User Manual
Page 18
I P - C o m m K i t I n s t a l l a t i o n a n d A d m i n i s t r a t i o n G u i d e
f o r A I X – R e l e a s e 1 . 0 . 2 2
11/28/05
Datatek Applications Inc.
18
If you received your software on a CD, the software certificate number is printed on the label. If
the software was delivered electronically, the software certificate number is included in the e-mail
message. In either case, you must save the software certificate number since it serves as your
proof of purchase.
After installing the IP-CommKit software on your host computer, contact us to obtain a software
key. To generate your software key, we need your software certificate number and the
nodename of the host on which the software is installed. To determine the nodename, enter the
following command on the host:
$ uname -n
This prints the host's nodename.
The best way to contact us is to send an e-mail message to the following address:
In addition to your software certificate number and your host's nodename, please include your
name, your company's name, your e-mail address and telephone number. Also include the
revision number of the IP-CommKit software. This will help us to contact you when maintenance
releases are available. This documentation applies only to revisions starting with 1.0.12.0.
Datatek will send you a reply with a software key that is generated from your software certificate
number and your host's nodename. For example, here is the software key for Datatek’s
development machine: