Daktronics DakStats Football - Manual (Page 33)

In Game Operations 27
Manually Adding and Inserting Drives
1. Locate the place where the drive should have taken place in the Play-by-play and
Editing section.
2. Go to Edit > Insert Drive to copy the selected drive with a new Dummy Down before
the selected drive or click Add Drive to put a Dummy Down after the selected drive.
3. Select the Dummy Down and enter how it should have happened.
Deleting Drives
1. Locate the drive to be deleted in the Play by
play and Editing section.
2. Go to Edit > Delete Drive.
3. In the Delete Drive window (Figure 27), select
whether to Delete Plays, Move to previous, or
Move to next.
4. Click Yes to confirm the deletion.
Add or Edit Play Commentary
1. Select the play to add to or edit.
2. Go to Edit >Add/Edit Play Commentary.
3. In the Add Commentary to
Play window (Figure 28),
type in the text desired to
be used in the play-by-
play report.
Rebuild Stats
Users are able to rebuild stats by one play at a time or the entire game at once. Be sure to
rebuild the stats after editing previous plays.
Go to Edit > Rebuild Stats (Figure 29).
 Click Step to rebuild one play
at a time. The Step button will
have to be clicked every time
to move on to the next play.
 Click the Go button to begin
rebuilding the entire game.
 Press [Esc] to cancel.
Check for Errors
Check a game for statistical errors by going to Edit > Check for Errors. Any errors found will
be bolded in the play-by-play commentary and the total number of issues will appear in the
lower-left corner of the window. Hovering the mouse over a bolded play will also display the
suspected issue (Figure 30).
Click the play to edit as needed,
and then go to Edit > Check for
Errors again; fixing one issue
may trigger changes that resolve
several other issues down the line.
Figure 27: Delete Drive Window
Figure 28: Add Commentary to the Play
Figure 29: Rebuilding Database Statistics
Figure 30: Error Check Status Bar