Daktronics CE-1010 - Manual (Page 19)

Section 4: Maintenance and
Troubleshooting
Important Notes:
Maintenance and Troubleshooting 4-1
1. Disconnect power before any repair or maintenance work is
done on the display.
2. Qualified service personnel must make any access to internal
display electronics.
3. Disconnect power when the display is not in use.
Reference Drawings:
Label Detail Drawing, CE-10**-****-*.*, RS422.........................Drawing A-110324
1.2" Displays
Final Assy; CE-1010-****-1.2-RG .............................................Drawing B-110268
Schematic; CE-10**-824/30-1.2-**............................................Drawing B-113015
Schematic; CE-10**-1224/30-1.2-**..........................................Drawing B-113344
2.1" Displays
Final Assy; CE-1010-4**-2.1-SBRG .........................................Drawing B-140722
Final Assy; CE-1010-****-2.1-RG .............................................Drawing B-121808
Schematic; CE-10**-424/30-2.1-**............................................Drawing B-140608
Schematic; CE-10**-824/30-2.1-**............................................Drawing B-121853
Schematic; CE-10**-1224/30-2.1-**..........................................Drawing B-121854
3.2" Displays
Final Assy; CE-1010-****-3.2-RG .............................................Drawing B-146115
Schematic; CE-10**-418/24-3.2-**............................................Drawing B-145059
Schematic; CE-10**-618/24-3.2-**............................................Drawing B-144982
4.2" Displays
Final Assy; CE-1010-****-4.2-RG .............................................Drawing B-110430
Schematic; CE-10**-412/18-4.2-**............................................Drawing B-107790
Schematic; CE-10**-612/18-4.2-**............................................Drawing B-109996
The DataTrac CE-1010 displays are front access. The components within the displays are not
field repairable. In most cases, it is easiest to completely replace the failed part or return it to
Daktronics for repair.
Refer to the project specific shop drawings provided by the project manager.