Daktronics DataTime Outdoor LED Time & Temperature Displays - Manual (Page 39)

Time & Temperature Format/Hold Settings
A hold time can be modified for time and temperature (both ºF and ºC) by pressing the
<EDIT/ENTER> key during operation (when the current item to edit is shown) or using the
<MENU> key.
LCD Screen Action
TIME- 12HR 6COL
↑
HOLD 00.0 SEC
Select the hold time in seconds, and the selection of 12-hr or
24-hr time is also be adjusted here.
For temp you can choose: XXº, XXF, XX (blank) for
Fahrenheit temps and XXº, XXC, XXc and XX (blank) for
Celsius temps [XXº is the default for ºF, and XXc is the default
for ºC]
For humidity you can choose: XXh or Xrh [XXh is the default
setting]
Hold Time 00.0 shows the current hold time in seconds. The
default is 5 seconds (05.0).
Press the number keys to change this value.
To save changes, press the <ENTER> key when finished
editing.
Press the <CLEAR> key to cancel changes.
ºF – FORMAT XXº
↑
HOLD SS.T SEC
ºC – FORMAT XXc
↑
HOLD SS.T sec
%RH – FORMAT XXc
↑
HOLD SS.T sec
Note: Setting the hold time to 00.0 seconds for any of the above hold times will disable that
function of the display. This is useful at times when only one temperature format will be
used.
An option to set relative humidity (RH) is available on the DM-100 controller, but cannot be
read using the standard temp/light sensor.
DM-100 Controller 35