Daktronics DataTime Outdoor LED Time & Temperature Displays - Manual (Page 37)

After setting the time you will need to set the date. If the date is already correct, enter
through the date and press <ENTER> to send the time to the display. If the date is not
correct, follow the steps below.
Set Date
Use the set date menu to enter the date in the display.
LCD Screen Action
SET TODAYS DATE
MM/DD/YY
MM/DD/YY
ENTER TO SEND
MM – Current month
DD – Current day
YY – Current year (last two digits)
Input the month (MM) using the number keys.
Press <ENTER> to move to DD. Enter the day.
Press to move to YY. Enter the appropriate year.
Note: The flashing asterisk on the LCD shows the current data
being edited.
When finished inputting today's date, press <ENTER> to send to
the display and continue to the next screen.
Degrees F Temperature Offset
Use the Set ºF Temperature Offset menu to set the degrees Fahrenheit offset temperature.
This is the value (in degrees) that the display will automatically increment or decrement the
Fahrenheit temperature value read from the temperature sensor.
LCD Screen Action
ºF TEMP OFFSET
ENTER TO EDIT
ºF TEMP OFFSET
+00
↑↓
+00 shows the current ºF temp offset. Press the up or down
arrow keys <
↑↓> to modify the temperature offset.
Only values between -16 and +16 are allowed.
Press the <ENTER> key when finished editing to save
changes.
Press the <CLEAR> key to cancel changes
Note: The temperature offset may be set in either Celsius or Fahrenheit. A conversion will be
used to determine the correct offset of the modified temperature.
DM-100 Controller 33