Cybex 750AT Arc Trainer - Manual (Page 66)

Cybex Arc Trainer 750A/750AT Owner’s Manual
66
Preventive Maintenance Activities
Perform regular preventive maintenance to ensure normal operation of unit. Keep a log of all
maintenance actions to assist in staying current with all preventive maintenance activities.
NOTE: Cybex is not responsible for performing regular inspection and maintenance actions of this
unit. Instruct all personnel in equipment, inspection and maintenance. Require all personnel to
report and record all accidents.
Read and understand warnings listed in this chapter and in the Safety Section. Read and
understand all instructions in this section.
During maintenance, disconnect the external power source. If unit has the optional AC Power Kit,
unplug the power cord from the power outlet.
For some maintenance activities it will be necessary to remove and replace the access cover.
Tool Required
Phillips screwdriver
Remove Access Cover
Using a Phillips screwdriver, remove the two lower screws securing the access cover. 1.
Lower Screws (2)
Access
Cover
Upper Screws (2)
Using a Phillips screwdriver, remove two upper screws securing the access cover. Refer to the 2.
above diagram.
Remove the access cover.
3.