Cybex 750AT Arc Trainer - Manual (Page 11)

Cybex Arc Trainer 750A/750AT Owner’s Manual
11
Assembly and Set Up
Warning and Caution Decals
Read and understand all warnings and cautions listed in Safety Section before assembling unit.
Use extreme caution when assembling the unit. Failure to do so could result in injury or death.
WARNING: Always use proper lifting methods when moving heavy items.
Ensure all electrical requirements are met as indicated in the specifications in the Safety Section and
as listed in this chapter.
Choosing and Preparing Site
Before assembling the unit, verify chosen site meets the following criteria:
Area is well lit and well ventilated.
Surface is structurally sound and properly leveled.
NOTE: Place a 3/4” (1.9 cm) thick wood base under unit to protect carpeting.
Area allows for ample access and passage clearance around unit or for emergency dismount.
Minimum clearance is 19.7 inches (.5 meters) on at least one side of unit and also behind unit.
Electrical Power Requirements
NOTE: The AC power kit is optional.
Verify unit is connected to an outlet having the same configuration as the plug
Verify connection is a grounded circuit.
NOTE: Do not use a ground-plug adapter to adapt the 3-prong power cord to a non-grounded
electrical outlet.
NOTE: Use Cybex supplied optional AC power kit only. Consult an electrician with any questions.
Verify power supply is compliant with local building codes.