Cybex 750AT Arc Trainer - Manual (Page 15)

Cybex Arc Trainer 750A/750AT Owner’s Manual
15
Tools Required
Phillips screwdriver •
Torque wrench (in/lb) •
3/16” Allen wrench (supplied) •
7/32” Allen wrench (supplied) •
9/16” Open end wrench •
NOTE: The words “left” and “right” denote the user’s orientation.
Read and understand all instructions thoroughly before assembling unit.
Verify correct package.
Read box label to verify the model number and voltage (optional) match what was ordered. 1.
Lift and remove cardboard sleeve surrounding unit. 2.
Verify paint color matches what was ordered. 3.
Verify correct voltage if option AC power kit is included. 4.
Unpack and verify 750A contents of carton.
See 750A content listing and diagram below for 750A carton contents. 1.
Check off each item as found. See 2. Customer Service for contact information if any parts are
missing.
750A Contents
Item Quantity Part Number Description
1 1 Vanes Base with covers attached
1a 1 Vanes Console assembly (in box)
2a 1 750A-124 Handrail assembly
3 2 12090-322 Foot pad
4 1 740A-370 Tray, Main
5 1 740A-371 Tray, insert
6 1 NA Hardware pack
7 1 5750-4 Owner’s Manual
8 1 750A-402 Assembly poster
9 1 750A-391 Commercial Arc warranty sheet
10 1 750A-392 Consumer Arc warranty sheet