CREATOR SC-390 - Manual (Page 27)

CREATOR CHINA 2011-08 WWW.CREATOR1997.COM
20 Professional SDI/DVI/HDMI Switch Scaler User’s Manual
DVI Video Signal Output
Interface DVI-D interface
Min./max. level T.M.D.S+/-0.4Vpp
impedance 50Ω
Recommended max.
transmission distance
Less than 7 meters, when at 1920X1080@60 (Recommend to use the certified DVI
professional cables, such as Molex TM cables)
3G-SDI Output
Interface BNC mother connector
Impedance 75Ω
Echo loss <-15dB,DC@1MHz to 1.5GHz
Max. DC compensation ±5Mv
Output impedance 75Ω
HDMI output
Interface HDMI-A mother interface
Min./max. level T.M.D.S. 2.9V/3.3V
Impedance 50Ω
Recommended max.
output distance
Less than 10 meters, when at 1920X1080@60 (Recommend to use the certified HDMI
professional cables, such as Molex TM cables)
Audio Signal
Input/output interface 4-way 3.8mm phoenix interface stereo audio input, 1-way 3.8mm phoenix interface stereo
audio output
Gain 0 dB
Frequency response 20 Hz ~ 20 kHz,
Total Harmonic Distortion
+ Noise
0.05% @ 1 kHz (under the rated voltage)
Signal/Noise Ratio (S/N) >58dB
Stereo Crosstalk >80dB @ 1 kHz
Common Mode Rejection
Ratio (CMRR)
>75dB @: 20 Hz ~ 20 kHz
Signal type Stereo (Non-end-to-end audio)
Impedance
input: >10 kΩ(balance or/ non-balance way of connection)
output: 50 Ω (non-balance way of connection), 100 Ω(balance way of connection)
Max. input level +19.5dBu, (balance or/ non-balance way of connection)
Gain error ±0.1dB @20 Hz ~ 20 kHz
Max. output level +19.5dBu, (balance or/ non-balance way of connection)
Control Control Control Control Type Type Type Type Network Network Network Network Control Control Control Control
Serial control interface RS-232, 9-pin mother D-type interface RS-485
Baud rate and protocol Baud rate: 9600, data bit: 8 bit, stop bit: 1, no parity check bit
Serial control port
structure
2 = TX, 3 = RX, 5 = GND
Specification Specification Specification Specification
Power 100VAC-240VAC 50/60 Hz, automatically adaptable to international power
Storage temperature -40° C～ +80°C