CREATOR SC-390 - Manual (Page 21)

CREATOR CHINA 2011-08 WWW.CREATOR1997.COM
14 Professional SDI/DVI/HDMI Switch Scaler User’s Manual
4.4 4.4 4.4 4.4 Gamma Gamma Gamma Gamma Value Value Value Value Setting Setting Setting Setting Command Command Command Command
format: @gamma->X! X: gamma value range 0.4~1.6 stepping as 0.2
Command Function description
@gamma->0.6! Set the output gamma value as 0.6
@gamma->0.8! Set the output gamma value as 0.8
@gamma->1.0! Set the output gamma value as 1.0
@gamma->1.2! Set the output gamma value as 1.2
@gamma->1.4! Set the output gamma value as 1.4
4.4.1 4.4.1 4.4.1 4.4.1 Gamma Gamma Gamma Gamma Value Value Value Value Setting Setting Setting Setting Return Return Return Return Command Command Command Command
The gamma value setting return command in the panel key operation is similar with the command
for gamma value setting, except that “key operate:” is added before the command. Both share the same
function description, e.g.
format: key operate: @gamma->X! X: gamma value range 0.4~1.6 stepping as 0.2
Command Function description
key operate: @gamma->0.6! Set the output gamma value as 0.6
key operate: @gamma->0.8! Set the output gamma value as 0.8
key operate: @gamma->1.0! Set the output gamma value as 1.0
key operate:...... ......
4.5 4.5 4.5 4.5 Contrast Contrast Contrast Contrast Setting Setting Setting Setting Command Command Command Command
format: &ACE->X! X: ACE Strength value range 00~15 stepping as 01
Command Function description
&ACE->00! Set ACE Strength value as 00
&ACE->01! Set ACE Strength value as 01
&ACE->02! Set ACE Strength value as 02
&ACE->03! Set ACE Strength value as 03
&ACE->04! Set ACE Strength value as 04
&ACE->05! Set ACE Strength value as 05
&ACE->06! Set ACE Strength value as 06
&ACE->07! Set ACE Strength value as 07
&ACE->08! Set ACE Strength value as 08
&ACE->09! Set ACE Strength value as 09
&ACE->10! Set ACE Strength value as 10
&ACE->11! Set ACE Strength value as 11
&ACE->12! Set ACE Strength value as 12
&ACE->13! Set ACE Strength value as 13
&ACE->14! Set ACE Strength value as 14
&ACE->15! Set ACE Strength value as 15