CREATOR SC-390 - Manual (Page 22)

CREATOR CHINA 2011-08 WWW.CREATOR1997.COM
15 Professional SDI/DVI/HDMI Switch Scaler User’s Manual
4.5.1 4.5.1 4.5.1 4.5.1 Contrast Contrast Contrast Contrast Setting Setting Setting Setting Return Return Return Return Command Command Command Command
The contrast setting return command in the panel key operation is similar with the command for
contrast setting, except that “key operate:” is added before the command, and both share the same
function description. E.g.:
format: key operate: &ACE->X! X: ACE Strength value range 00~15 stepping as 01
Command Function description
key operate: &ACE->02! Set ACE Strength value as 02
key operate: &ACE->03! Set ACE Strength value as 03
key operate:...... ......
4.6 4.6 4.6 4.6 Detail Detail Detail Detail Enhancement Enhancement Enhancement Enhancement Setting Setting Setting Setting Command Command Command Command
format: %DetailLevel->X! X: Detail Level range 000~255 stepping as 001.Example:
Command Function description
%DetailLevel->000! Set Detail Level value as 000
%DetailLevel->123! Set Detail Level value as 123
%DetailLevel->222! Set Detail Level value as 222
%DetailLevel->255! Set Detail Level value as 255
4.6.1 4.6.1 4.6.1 4.6.1 Detail Detail Detail Detail Enhancement Enhancement Enhancement Enhancement Setting Setting Setting Setting Return Return Return Return Command Command Command Command
The detail enhancement setting return command in the panel key operation is similar with the detail
enhancement setting command, except that “key operate:” is added before the command, and both
share the same function description. E.g.:
format: key operate: %DetailLevel->X! X: Detail Level range 000~255 stepping is 001
Command Function description
key operate: %DetailLevel->123! Set Detail Level value as 123
key operate: %DetailLevel->222! Set Detail Level value as 222
key operate: %DetailLevel->255! Set Detail Level value as 255
key operate:...... ......
4.7 4.7 4.7 4.7 Image Image Image Image Color Color Color Color Offset Offset Offset Offset Setting Setting Setting Setting command command command command
format: ^offset->X,Y,Z! X: Red offset range -1023~+1023 stepping is 0001
Y: Blue offset range -1023~+1023 stepping is 0001
Z: Green Offset range -1023~+1023 stepping is 0001
Example:
Command Function description
^offset->+0000,+0000,+0000! Set red Offset +0000, blue Offset +0000, green Offset +0000
^offset->+0010,+0020,+0030! Set red Offset +0010, blue Offset +0020, green Offset +0030
^offset->+0400,+0500,+0600! Set red Offset +0400, blue Offset +0500, green Offset +0600
^offset->+1000,+1000,+1000! Set red Offset +1000, blue Offset +1000, green Offset +1000
^offset->+1023,+1023,+1023! Set red Offset +1023, blue Offset +1023, green Offset +1023