4exampleofoperations, Example of operations – CREATOR SC-390 User Manual

Page 14

CREATOR CHINA

2011-08

WWW.CREATOR1997.COM

Professional SDI/DVI/HDMI Switch Scaler User’s Manual

item to be set, and then press “ENTER” key to

confirm enter;

Step

Step 3,

3, press “▲ and ▼” key or PARAMETER

knob to move up/down or left/right to select the

parameter

for

the

item

set,

and

corresponding

parameter

information

will

shown by turns on the LCD display upon every

pressing;

After entering the parameter setting menu,

the current status of the item to be set in the

system will be shown as the first parameter

information;

Step

Step 4,

4, after selecting the needed parameter,

press “ENTER” key to confirm selection;

Step

Step 5,

5, if it is necessary to set multiple

parameters, then after confirming each parameter,

press “MENU” key to return to the menu of the

upper level, and simply repeat the operations in

Step 2, 3 and 4.

2.4.4

2.4.4 Example

Example

Example of

of Operations

Operations

E.g.:

Set

the

output

resolution

1280X1024@60Hz, and set contrast to 5.0.

1、Press “MENU” key to enter menu setting, and

on the LCD display it is shown as follows;

2、Press “MENU” key to enter menu setting, and

use the “▲▼” key to select the parameter for the

“OUTPUT Format”;

3 、 Press “ENTER” to confirm setting, and enter

parameters setting. At this moment, on the LCD

display shows the current status of the item to be

set. Use the “▲▼” key to search for the

parameter 1280X1024@60Hz;

4、Press “ENTER” to confirm change, and the

parameter information is shown on the LCD

screen after successful setting;

5、Press “MENU” key to return to the upper menu,

and use the “▲▼” key to search for the item

“Adaptive Contrast” to be set;

6、 Press “ENTER” to confirm setting, and enter

parameters setting. At the moment, the LCD

display should show the current status of the item

to be set. Use “PARAMETER” knob to roll

left/right to set to the required parameter “5.0” and

finish setting.