CREATOR SC-390 - Manual (Page 11)

CREATOR CHINA 2011-08 WWW.CREATOR1997.COM
4 Professional SDI/DVI/HDMI Switch Scaler User’s Manual
Video input port, available to 7-way video
input (YPbPr, Y/C, CV, VGA, 3G-SDI, DVI and
HDMI), for connection with peripheral video signal
source equipment such as DVD, PC,
high-definition player, etc.
9) 9) 9) 9) VIDEO VIDEO VIDEO VIDEO OUTPUTS OUTPUTS OUTPUTS OUTPUTS
Video output port, offering 3-way video
output (3G-SDI, DVI, HDMI), for connection with
3G-SDI, DVI, HDMI interface video displayers,
such as high-definition display and player, or for
connection with such equipment as video player.
The input/output of audio of 3G-SDI and
HDMI signal formats is transmitted and switched
together with its video signal input/output.
10) 10) 10) 10) KEYBOARD KEYBOARD KEYBOARD KEYBOARD— — — —Extension Extension Extension Extension keyboard keyboard keyboard keyboard
interface interface interface interface
Offering 1-way extension keyboard interface,
for use together with CREATOR CR-MCP100
control keyboard.
ETHERNET--RJ45 ETHERNET--RJ45 ETHERNET--RJ45 ETHERNET--RJ45 network network network network interface interface interface interface
Providing 1-way Ethernet connection port, for
connection with LAN and Ethernet. Green light
when on indicates connection is proper, while
flashing orange light indicates data are being
received or sent.
RS-232 RS-232 RS-232 RS-232
Serial interface, offering 2-way RS-232 port,
for connection with PC or a third party control
equipment (such as CREATOR, CRESTRON,
AMX control main unit, etc.).
11) 11) 11) 11) Grounding Grounding Grounding Grounding post. post. post. post.
12) 12) 12) 12) System System System System power power power power input input input input port port port port
System power input is AC 100V-240V
50/60Hz.
Difference between ▲ ▼ direction key and
PARAMETER/ADJUST knob:
▲ ▼ direction key can only be used when
inquiring about and selecting parameters of
resolution and current status;
PARAMETER/ADJUST knob can not only be
used when performing the above functions, but
also be used when selecting and setting such
parameters as gamma, contrast, detail strong and
image color.
2.2 2.2 2.2 2.2 Interface Interface Interface Interface
2.2.1 2.2.1 2.2.1 2.2.1 COM COM COM COM Port Port Port Port
Professional SDI/DVI/HDMI switch scaler
may be used to control various types of control
systems. LED screen controller may be controlled
through RS-232 serial interface or the optional
Ethernet control port.
COM port pins are described as follows:
Pin Signal Description
1 - Empty
2 TXD Transmitting data
3 RXD Receiving data
4 - Empty
5 GND Signal Ground
6 - Empty
7 - Empty
8 - Empty
9 - Empty
2.2.2 2.2.2 2.2.2 2.2.2 RJ45 RJ45 RJ45 RJ45 Internet Internet Internet Internet Cable Cable Cable Cable Production Production Production Production
Method Method Method Method
CAT-5 (Category-5 Cable) is used as the
wiring material in this system, and is connected
with internet equipment through RJ45 connector