Multiple unit addresses, 2 multiple unit addresses – Comtech EF Data KP-10 User Manual

Page 33

Text mode
Original mode

KP-10 External Keypad

Revision 1

Operation

MN/KP10.IOM

3.3.2 M

ULTIPLE

NIT

DDRESSES

To communicate with each terminal via the RSU, the following format is used:

<*/ASR_

(Meaning: RSU command - address 1)

In the previous example, the KP-10 is connected to an RSU. The global address
command was sent first, then AS was pressed to access the address for a specific terminal
before sending other commands.

In the following example, the address (2) of Terminal A follows “*”:

<*2/FS_

(Meaning: Terminal A command - address 2)

Note: Always make sure the correct address of any terminal (other than address 1) follows “*”

in the command string.

A list of typical commands used with an RSU includes the following:

'ASA_'

'ASB_'

'ASR_'

'BR_'

'PS_'

'ULS_'

'ULM_'

'DLS_'

'DLM_'

'HWC_'

'ROS_'

'RFS_'

'RSF_'

'RMS_'

'ET_'

'POLL_'

'LM_'