Comtech EF Data KP-10 - Manual (Page 15)

KP-10 External Keypad Revision 1
Operation MN/KP10.IOM
5
Chapter 2. CONFIGURATION
KP-10 Configurations 5
Connecting and Supplying Power 7
Using the Keypad 11
Configuring the KP-10 13
Entering Commands and Receiving Responses 14
2.1 KP-10 C
ONFIGURATIONS
The KP-10 is designed to operate with various RFT and KST Transceiver products. Additionally,
the KP-10 can communicate using various serial data communication interfaces, such as RS-232,
RS-485 and RS-422. Operation of the KP-10 with these products and data interfaces requires the
selection of the proper KP-10 terminal and interface cable. Refer to Table 1 for the proper KP-10
configurations. Please note that not all combinations of products and interfaces are possible.