Comtech EF Data KP-10 - Manual (Page 23)

KP-10 External Keypad Revision 1
Operation MN/KP10.IOM
13
2.3.4 C URSOR M OVEMENT K EYS
Cursor keys, containing directional arrows, are located below and to the left of the
character keys. The cursor keys do not require use of the [SHIFT] key. Press the key to
move the display screen cursor in the direction indicated by the arrow on the key.
2.4 C
ONFIGURING THE
KP-10
Access the default configuration settings using either of these two methods:
! While pressing any key, supply power to the external keypad.
or
! If power is already supplied, press [RESET] for a second.
The default configuration consists of several items:
! Version
! Contrast setting
! Baud rate
! Data format
! Serial mode
These items appear in a series of displays, each one accessed by pressing and releasing a
key.
After the default configuration has been completed, the KP-10 is ready for input.
2.4.1 V
ERSION
After power-on, the Version (v1.1) appears on the display screen.
2.4.2 C ONTRAST C ONTROL
Release the key pressed during power-on to display “CONTRAST” on the screen.
! DARKER — Press [SCROLL UP] to darken the display screen contrast.
! LIGHTER — Press [SCROLL DOWN] to lighten the display screen contrast.
Note: See Figure 5 for scroll key locations.