Comtech EF Data KP-10 - Manual (Page 12)

KP-10 External Keypad Revision 1
Operation MN/KP10.IOM
2
1.1 P URPOSE AND F UNCTION
The KP-10 is a handheld keypad that provides portable, external access for controlling
Comtech EF Data Transceivers and Redundancy Switch Units.
The KP-10 is typically used for the initial set up, occasional changes to the configurations
and routine maintenance status of RFT and KST satellite terminal systems. When the
KP-10 is used with a redundant system, it is typically connected to a Comtech EF Data
Redundancy Switch Unit, RJU, or a Redundancy Junction Unit, RJU.
Note: Permanent monitoring of RFTs is accomplished with a PC and the M&C System Monitor
Software . Information about the M&C System Monitor Software is found in the
installation and operation manuals for Comtech EF Data CST and KST terminals.
1.1.1 C
OMPATIBLE
E
QUIPMENT
The KP - 10 works with the following Comtech EF Data products:
! RFT 500 ! RFT 505
! RFT 700 ! RFT 1200
! RFT 1225 ! KST2000A/B/L
! RJU2000 ! RSU-503
! RSU-503L