Comtech EF Data CRS-200 - Manual (Page 55)

Rev. 1 9–1
9
Chapter 9.
CABLE DRAWINGS
Figure 9-1 shows the cable required for a simple EIA-232 connection between a PC serial
port and the CRS-200 remore control port. This is needed for Flash upgrading.
The EIA-530 standard pinout (provided on the CRS-200) is becoming more popular in
many applications. However, there are still many occasions when, especially for existing
EIA-422/449 and V.35 users, a conversion must be made.
For these situations, Figure 9-2 and Figure 9-3 show cable drawings for EIA-530 to EIA-
422/449 DCE conversion, and EIA-530 to V.35 DCE conversion.
Figure 9-4 shows the cable required to connect the TMIs and RMI to the modems.