Comtech EF Data CRS-200 - Manual (Page 41)

CRS-200 Redundancy Switch Front Panel Operation
Rev. 1 7–3
7.1.1 OPENING SCREEN
COMTECH CRS-200 SWITCH
S/N 1020 S/W VER 1.01
This screen is displayed whenever power is first applied to the unit. Pressing any key will
take the user to the top level selection screen:
SELECT: CONFIG INFO
MONITOR STORE/LD UTIL
7.1.2 SELECT
The user is presented with the following choices:
CONFIG (Configuration) This menu branch permits the user to fully configure the switch.
INFO (Information) This menu branch permits the user to view information on the switch, without
having to go into configuration screens.
MONITOR (Monitor) This menu branch permits the user to monitor the current status of the switch and
view the log of stored events for both the switch and its attached modems.
STORE/LD (Store/Load) This menu branch permits the user to store and to retrieve up to 10 different
switch configurations.
UTIL (Utility) This menu branch permits the user to perform miscellaneous functions, such as
setting the Real-time clock, adjusting the display brightness, etc.
Each of these options is now described in detail.