Comtech EF Data CRS-200 - Manual (Page 52)

Front Panel Operation CRS-200 Redundancy Switch
7–14 Rev. 1
WARNING! LOC 10 CONTAINS
NO DATA! (ENTER)
Pressing ENTER or CLEAR will take the user back to the previous menu.
7.1.7 UTIL (Utility)
UTILITY: SET-RTC DISPLAY
SWITCH-ID (PRESS ENTER)
The user is prompted to select SET-RTC, DISPLAY, or SWITCH-ID, using the
LEFT/RIGHT arrow keys, then to press ENTER. This sub-menu permits the user to
select from a number of different utility functions, which are described below:
7.1.7.1 (UTILITY) SET-RTC (Set Real-Time Clock)
EDIT REAL TIME CLOCK:
12:00:00 24/04/00 (ENT)
The user is prompted to edit the time and date settings of the real-time clock. This is
accomplished by selecting the digit to be edited, using the LEFT/RIGHT arrow keys. The
value of the digit is then changed using the UP/DOWN arrow keys. Note that in
accordance with international convention, the date is shown in DAY-MONTH-YEAR
format. The user should then press ENTER.
7.1.7.2 (UTILITY) DISPLAY (Display Brightness)
EDIT DISPLAY BRIGHTNESS:
100% (PRESS ENTER)
The user is prompted to edit the display brightness, using the UP/DOWN arrow keys. The
user should then press ENTER.
7.1.7.3 (UTILITY) SWITCH-ID
EDIT SWITCH ID: (ENTER)
---- THIS IS A TEST ----
The user is prompted to edit the Switch ID string, using the LEFT/RIGHT and
UP/DOWN arrow keys. Only the bottom line is available (24 characters). The cursor
selects the position on the bottom line (LEFT/RIGHT) and the character is then edited
(UP/DOWN). The following characters are available:
Space ( ) * + - , . / 0-9 and A-Z.
When the user has composed the string, press ENTER.