Comtech EF Data CRS-200 - Manual (Page 51)

CRS-200 Redundancy Switch Front Panel Operation
Rev. 1 7–13
7.1.6 STORE/LD (Store or Load Configuration)
STORE/LOAD CONFIG:
STORE LOAD (PRESS ENTER)
The user is prompted to select STORE or LOAD using the LEFT/RIGHT arrow keys,
then to press ENTER. These sub-menus permit the user to store or load up to 10 different
switch configurations in its non-volatile memory. These are configurations for the switch
itself, not the modems attached to it.
7.1.6.1 (STO/LD) STORE
STORE CONFIGURATION TO
LOCATION: 10 (ENTER)
The user is prompted to select the location to store the current configuration to, using the
UP/DOWN arrow keys, then to press ENTER. Locations 1 through 10 are available. If
the selected location does not contain a previously stored configuration, the following
screen is displayed:
YOUR CONFIGURATION HAS
BEEN STORED! (ENTER)
Pressing ENTER or CLEAR will take the user back to the previous menu. If, however,
the selected location contains a previously stored configuration, the following screen is
displayed:
WARNING! LOC 10 CONTAINS
DATA OVERWRITE? NO YES
The user is prompted to select NO or YES using the LEFT/RIGHT arrow keys, then to
press ENTER. Selecting YES will overwrite the existing configuration at the selected
location.
7.1.6.2 (STO/LD) LOAD
LOAD CONFIGURATION FROM
LOCATION: 10 (ENTER)
The user is prompted to select the location to load a configuration from, using the
UP/DOWN arrow keys, then to press ENTER. Locations 1 through 10 are available. If
the selected location contains valid data, the following screen will be displayed:
THE NEW CONFIGURATION
HAS BEEN LOADED (ENTER)
Pressing ENTER or CLEAR will take the user back to the previous menu. If, however,
the selected location does not contain valid data, the following screen will be displayed: