Comtech EF Data CRS-200 - Manual (Page 49)

CRS-200 Redundancy Switch Front Panel Operation
Rev. 1 7–11
7.1.5 MONITOR
MONITOR: STATUS SW-ALARM
STORED-EVENTS TM-CONFIGS
The user is prompted to select STATUS, SW-ALARM, STORED EVENTS, or TM-
CONFIGS using the LEFT/RIGHT arrow keys, then to press ENTER.
7.1.5.1 (MONITOR) STATUS
TM 02 IS BRIDGED BY RM
BACKUP HOLDOFF: 05 SEC
This screen shows the current status of the switch. When the redundant modem is not
backing up any of the traffic modems, the display will show which TM is currently being
bridged by the RM. If Auto mode is on, it will also show the backup holdoff should the
bridged TM fail. If Auto mode is off, the second line displays “OFF”. When the switch
has taken the bridged TM offline and replaced it with the RM (whether done manually or
automatically), the screen changes as shown below:
TM 02 IS BACKED UP BY RM
RESTORE HOLDOFF: OFF
Now, the restore holdoff will be shown on the second line if Auto mode is on.
7.1.5.2 (MONITOR) STORED EVENTS
STORED EVENTS: VIEW
CLEAR ALL (PRESS ENTER)
The user is prompted to select VIEW or CLEAR ALL, using the LEFT/RIGHT arrow
keys, then to press ENTER.