Comtech EF Data CMR-5930 Manual - Manual (Page 19)

Chapter 2. INSTALLATION &
INITIAL CONFIGURATION
2.1 Major Assembly
The CMR-5930 is available in a standalone configuration. Table 2-1 lists the components
provided with a standard configuration. In the event any listed item is missing, please
contact Comtech EF Data Customer Support:
Table 2-1. CMR-5930 Digicast PID Filter ASI – Standalone Configuration
Quantity Description
1 CMR-5930 Digicast PID Filter ASI
1 SPU24-102 Power Supply
1 IEC Power Cable
1 CA-TERMINAL Terminal Cable
1 CD (includes this manual and the Quick Start reference)
1 Quick Start sheet
2.2 Unpacking
The shipping container and packing materials should be retained for possible reshipment.
Perform a receiving inspection as follows:
• Inspect
the shipping container for damage. If there is damage to the shipping
container, notify the carrier .
• Check
to determine that all parts, materials and documentation have been
shipped with the CMR-5930.
• Inspect
the CMR-5930 for possible physical damage.
• Test
the CMR-5930 for proper operation.
2-1