Comtech EF Data CMR-5930 Manual - Manual (Page 13)

Chapter 1. INTRODUCTION
Figure 1-1. CMR-5930 Digicast PID Filter ASI – Front Panel
1.1 Introduction
The Comtech EF Data (CEFD) CMR-5930 Digicast PID Filter ASI receives an MPEG-2
Asynchronous Serial Interface (ASI) input and outputs an MPEG-2 ASI stream that has
been filtered, Program Clock Reference (PCR) restamped, and the egress rate is adjusted
to the user’s desired configured rate.
The CMR-5930 provides unparalleled price versus performance, and is currently the most
economical ASI-to-ASI conditioning device available.
1.2 Standard Features
Based on an embedded architecture utilizing a Freescale MPC859 CPU and eCOS
Operating System, the CMR-5930 provides the following features:
•
High Reliability
•
ASI Input and ASI Output rates as high as 213 Mbps
•
Support for all valid PIDs in 8192 range
•
128 PIDs
•
MPEG-2 188/204-byte operation
•
Configurable Telnet and HTTP ports for security
•
Color LEDs for status monitoring and rapid fault isolation
1–1