Comtech EF Data M&C Software for Windows - Manual (Page 33)

Monitor and Control Software for Windows Revision 4
Operation MN/M-CWIN.IOM
2–17
2.4.5 Fault Log Screen
The fault log screen (Figure 2-15) shows all active faults as reported by all RF terminals
presently connected to the application. The user-selectable highlighted areas are useful
for clearing selected faults from the application’s memory. For further fault clearing
information, see Section 2.3.
The scroll bar allows access up to a maximum of 1000 stored faults as they are reported
by the RF terminals.
Figure 2-15. Fault Log Screen